■■■ Notes Before Purchase ■■■
[About Stock]As we share inventory across multiple stores, the displayed stock may not be in real-time.
We will contact you separately if an item is out of stock.
[About取り寄せ商品 (Ordered Products)]As a result of stock confirmation, items may be out of stock or discontinued.
In such cases, we may, at our sole discretion, cancel your order.
We appreciate your understanding.
[About Fixing Screws (Important)]We deliver sleeves with a
"head fixing screw" attached as a spare at the tip.
Please remove it before attaching the head.Please note that this screw is provided as a service, and the screw specifications may not match for some head models, making it impossible to fix. Thank you for your understanding.
■ Important Notes on Purchasing (Please Read Carefully)
To provide stable quality and service, please read the contents and check the box to proceed with your order.
1. About Length・We adopt the "60-degree method," and the standard for length is unified to the
"shaft end when the head is attached (the end of the shaft before the grip is attached)."・We do not measure the shaft alone or from the tip of the sleeve to the grip end.
・Even if you specify the same length as the manufacturer's genuine specifications, the finished product may not be exactly the same due to different measurement standards for each manufacturer.
・Therefore, we
cannot accept production at "exactly the same length as the manufacturer's genuine specifications." Thank you for your understanding.
2. About Shaft・The shaft logo is assembled
"face down" so that the logo is not visible when set up.
・If you have a separate specification, please be sure to enter it in the remarks column.
・The standard for the selected mounting position is "shaft logo on the back side (not visible when set up)."
・We do not perform balance adjustment or frequency measurement.
3. About Sleeve・This is a compatible sleeve, but it can be used without any problems.
・A spare head fixing screw is attached to the tip of the sleeve. Please remove it before attaching.
・Since this screw is a service item, the screw specifications may differ depending on the head model, and it may not be possible to attach it.
4. About Grip・We do not offer differential discounts within standard models.
・For standard models with a logo, the standard is
"logo inserted facing down (direction not visible when set up)."・If you wish to change the grip, select "Change" in the options and
be sure to purchase the grip separately on the sales page at the same time.
※If instructions are only in the remarks column or if ordered separately, we may not be able to identify the content and may not be able to respond.
▼Logo Direction Standard (Presence/Absence of Backline)・With backline: Logo up
・Without backline: Logo down
※If you have separate preferences, please enter them in the remarks column.
※With backline, the logo may appear to be covered by or open to the face due to individual differences in the head.
▼About Grip Underwrapping (Paid Option)The standard is single wrap (spiral wrap). Up to triple wrap is possible.
If desired, please purchase the product at the URL below for the required number (1 for double wrap, 2 for triple wrap) at the same time.
Underwrap Surcharge 110 yen
https://item.rakuten.co.jp/banzaigolf/repair-00008/
5. About Delivery Time・Due to
complete made-to-order production, we will ship within
4-5 business days after your order is confirmed, excluding weekends and holidays.
・We will produce in the order received. We cannot respond to individual shipping date notifications (responses to催促).
・During busy seasons, sale periods, and before long holidays, it may take longer than usual.
6. About Cancellation/Returns・As this product is completely made-to-order and involves shaft cutting,
we cannot accept any cancellations or changes to the content (type, length, position, etc.) after the order is confirmed. ※Excluding cases of our operational errors or initial defects.
■ About Delivery and Shipping
[About Delivery Schedule Display on Upside Golf Main Store]・The displayed "shortest delivery date" is an estimate and does not guarantee the delivery time.
・Made-to-order products and ordered products may take time to ship.
・In-stock products may arrive earlier than the estimate, but delays may also occur depending on the situation. Please order with ample time.
[About Unattended Delivery]・As many items are expensive and to avoid damage and theft risks,
we do not support "unattended delivery" to outdoor locations.・We also do not write "unattended delivery request" on the shipping label.
・We primarily request face-to-face receipt. If you wish to use a delivery locker, please enter it in the remarks column, and we will reflect it on the slip as much as possible.
※If the delivery locker cannot be used due to the delivery person's judgment, it will be delivered face-to-face.
Product Basic Information Mobius LIQUID is
the ultimate shaft designed for golf enthusiasts.
Flow Point Technology brings an innovative swing experience.
This shaft, which increases head speed and
extends distance through flex,
guides the ball you hit to the optimal trajectory according to your swing.
Reinforced tip, flexible mid-section,
and high-rigidity butt section integrate,
achieving optimal rigidity distribution and kick point.
With expensive materials and precise design,
it eliminates excess vibration and suppresses deviation to the extreme.
Each model of MOBIUS LIQUID FX SuperLITE, LITE, FX, and FX H
can be selected by weight and kick point,
providing optimal performance tailored to your playstyle.
DT Mobius LIQUID FX SuperLITE
LOW: Weight 42.5g, Torque 6.7, Tip Diameter 8.5mm
MID: Weight 42.5g, Torque 6.7, Tip Diameter 8.5mm
DT Mobius LIQUID FX LITE
LOW: Weight 51.0g, Torque 4.5, Tip Diameter 8.5mm
MID: Weight 51.0g, Torque 4.5, Tip Diameter 8.5mm
HIGH: Weight 51.0g, Torque 4.5, Tip Diameter 8.5mm
DT Mobius LIQUID FX
LOW: Weight 57.0g, Torque 3.9, Tip Diameter 8.5mm
MID: Weight 57.0g, Torque 3.9, Tip Diameter 8.5mm
HIGH: Weight 57.0g, Torque 3.9, Tip Diameter 8.5mm
DT Mobius LIQUID FX H
LOW: Weight 65.0g, Torque 3.8, Tip Diameter 8.5mm
MID: Weight 65.0g, Torque 3.8, Tip Diameter 8.5mm
HIGH: Weight 65.0g, Torque 3.8, Tip Diameter 8.5mm
Mobius
LIQUID
FW
Flow Point Technology
Swing Behavior
Kick Point
Head Speed
Swing Improvement
[[IF setVal=詳細情報1]] [[詳細情報1]] [[詳細情報内容1]]
【Important】Notes before purchasing (please read carefully) To provide stable quality and service, please read the contents and agree to proceed with your order.
■About stock and backorders *About stock
As we share inventory across multiple stores, the displayed stock may not be in real-time.
We will contact you separately if an item is out of stock.
*About backordered products
As a result of stock confirmation, items may be out of stock or discontinued.
In such cases, we may, at our sole discretion, cancel your order. Thank you for your understanding.
■About head fixing screws We deliver sleeves with a head fixing screw attached as a spare at the tip.
Please remove it before attaching the head.
Please note that this screw is provided as a service, and the screw specifications may not match for some head models, making it impossible to fix. Thank you for your understanding.
1. About length measurement standard We adopt the "60-degree method," and the standard for length is unified to the [shaft end when the head is attached (the end of the shaft before the grip is attached)].
・We do not measure the shaft alone or from the tip of the sleeve to the grip end.
・Even if you specify the same length as the manufacturer's genuine specifications, the finished product may not be exactly the same due to different measurement standards for each manufacturer.
・Therefore, we cannot accept production at "exactly the same length as the manufacturer's genuine specifications." Thank you for your understanding.
2. About shaft assembly ・The shaft logo is assembled "face down" so that the logo is not visible when set up.
・If you have a separate specification, please be sure to enter it in the remarks column.
・For the selected mounting position, the standard for assembly is "shaft logo on the back side (not visible when set up)."
・We do not perform balance adjustment or frequency measurement.
3. About sleeve ・This is a compatible sleeve, but it can be used without any problems.
・A spare head fixing screw is attached to the tip of the sleeve. Please remove it before attaching.
・This screw is part of our service, and it may not be possible to attach it due to differences in screw specifications depending on the head model.
4. About grip ・We do not offer differential discounts within standard models.
・For standard grips with a logo, the standard is "logo inserted facing down (direction not visible when set up)."
[If you wish to change the grip]
・Select "Change" from the options, and be sure to [purchase] the grip separately on the sales page at the same time.
・If instructions are only in the remarks column or if the grip is ordered separately (separate payment), we may not be able to identify the content and may not be able to respond.
[Standard for backline and logo direction]
・With backline: Logo up
・Without backline: Logo down
※If you have separate preferences, please enter them in the remarks column.
※With backline, the logo may appear to be covered by or open to the face due to individual differences in the head.
[About grip underwrapping]
The standard is single wrap, and up to triple wrap is possible.
For double wrap or more, please purchase "Underwrap Surcharge (110 yen)" separately.
・For double wrap: purchase 1 item
・For triple wrap: purchase 2 items
※We use "spiral wrap" as the standard.
Underwrap Surcharge page URL:
https://item.rakuten.co.jp/banzaigolf/repair-00008/
5. About delivery time ・Due to complete made-to-order production, we will ship within [4-5 business days] after your order is confirmed, excluding weekends and holidays.
・Please check the estimated shipping date listed on the product page and place your order according to your usage schedule.
・We will produce in the order received. We cannot provide individual shipping date notifications or expedite requests.
・During busy seasons, sale periods, and before long holidays, it may take longer than usual.
6. About cancellation, returns, and changes ・As this product is completely made-to-order and involves shaft cutting, we cannot accept any cancellations or changes to the content (shaft type, length, mounting position, etc.) after the order is confirmed.
※Excluding cases of our operational errors or defects.
■About delivery and shipping [About Upside Golf Main Store's estimated delivery date display]
・The displayed "shortest delivery date" is an estimate and does not guarantee delivery by our store.
・Completely made-to-order products and ordered products may take time to ship.
・In-stock products may arrive earlier than the estimate, but delays may also occur depending on the situation. Please order with ample time.
[About unattended delivery]
・As many items are expensive, and from the perspective of preventing damage and theft, we do not support "unattended delivery" to outdoor locations.
・We also do not write "unattended delivery request" on the shipping label.
・We recommend face-to-face receipt, but if you wish to use a delivery locker, please enter it in the [remarks column]. We will reflect it on the shipping slip as much as possible.
※If the delivery locker cannot be used due to the delivery person's judgment, it will be delivered face-to-face.
