■■■ Important Notes Before Purchase ■■■
[About Stock]As our store shares inventory with multiple other stores, the displayed stock may not be real-time.
We will contact you separately if an item is out of stock.
[About取り寄せ商品]As a result of stock confirmation, items may be out of stock or discontinued.
In such cases, we may, at our discretion, cancel your order.
We appreciate your understanding.
[About Fixing Screws (Important)]We deliver sleeves with a
"head fixing screw" attached as a spare at the tip of the sleeve.
When installing, please remove it once before use.Please note that this screw is provided as a service, and depending on the head model, the screw specifications may not match, and it may not be possible to fix it. We appreciate your understanding.
■ Notes on Purchase (Please read carefully)
To ensure stable quality and service, please read the contents and proceed to order after checking.
1. About Length・We adopt the "60-degree rule" and unify the length standard to
"the shaft end when the head is attached (the end of the shaft before the grip is attached)".
・We do not measure the shaft alone or from the tip of the sleeve to the end of the grip.
・Even if you specify the same length as the manufacturer's genuine value, the finished product may not be exactly the same because each manufacturer has different measurement standards.
・Therefore, we
cannot accept production "with the exact same length as the manufacturer's genuine product." We appreciate your understanding.
2. About Shaft・The shaft logo is assembled
"face down" so that the logo is not visible when set up.
・If you have any other specific requests, please be sure to write them in the remarks column.
・For the selected mounting position, the standard is that the "shaft logo is on the back side (not visible when set up)".
・We do not perform balance adjustment or frequency measurement.
3. About Sleeve・This is a compatible sleeve, but it can be used without any problems.
・A spare head fixing screw is attached to the tip of the sleeve. Please remove it before installation.
・This screw is a service item, and depending on the head model, the screw specifications may differ and it may not be possible to install it.
4. About Grip・We do not offer differential discounts within standard models.
・For standard models with logos, the standard is
"logo inserted face down (not visible when set up)".
・If you wish to change the grip, select "Change" in the options and
be sure to purchase the grip alone simultaneously on a separate sales page.
※If instructions are only in the remarks column or it is a separate order, the content may not be identifiable and we may not be able to respond.
▼Logo orientation standard (with or without backline)・With backline: logo face up
・Without backline: logo face down
※If you have any other specific requests, please write them in the remarks column.
※For grips with a backline, due to individual differences in heads, the logo may appear to overlap or open relative to the face.
▼About grip underwrap (paid option)The standard is a single wrap (spiral wrap). Up to a triple wrap is possible.
If you wish, please purchase the product at the URL below simultaneously for the required number (1 for double wrap, 2 for triple wrap).
Underwrap Surcharge 110 yen
https://item.rakuten.co.jp/banzaigolf/repair-00008/
5. About Delivery Time・Due to
complete made-to-order production, orders will be shipped within
4 to 5 business days after order confirmation, excluding Saturdays, Sundays, and public holidays.
・Products will be manufactured in the order received. We cannot provide individual shipping date notifications (responses to expedited requests).
・During busy seasons, sale periods, and before major holidays, it may take longer than usual.
6. About Cancellation/Return・Since this product is completely made-to-order involving shaft cutting,
cancellations and content changes (type, length, position, etc.) after order confirmation are not accepted at all. ※Excluding cases of our store's work errors or initial defects.
■ About Delivery/Shipping
[About Upside Golf Main Store's Shipping Schedule Display]・The displayed "earliest delivery date" is an estimate and does not guarantee the delivery time by our store.
・Made-to-order products and取り寄せ items may take time to ship.
・In-stock items may arrive earlier than the estimate, but delays may also occur depending on the situation. Please place your order with ample time.
[About Leave at Door Delivery]・Due to many high-value products and to avoid the risk of damage or theft, we
do not support "leave at door" delivery to outdoor locations.・We also do not write "request leave at door" on the shipping label.
・We generally request in-person receipt. If you wish to use a delivery locker, please write it in the remarks column, and we will reflect it on the slip as much as possible.
※If the delivery person determines that it cannot be used, it will be delivered in person.
Product Basic Information The MOBIUS LIQUID is
the ultimate shaft designed for golf enthusiasts.
Flow Point Technology brings an innovative swing experience.
This shaft increases head speed,
extends distance through flex,
and guides the ball you hit to the optimal trajectory according to your swing.
The reinforced tip, flexible middle section,
and highly rigid butt section unite to
achieve optimal stiffness distribution and kick point.
With high-quality materials and precise design,
it eliminates excess vibration and suppresses blurring to the extreme.
MOBIUS LIQUID FX SuperLITE, LITE, FX, and FX H models can be
selected by weight and kick point,
providing optimal performance tailored to your play style.
DT MOBIUS LIQUID FX SuperLITE
LOW: Weight 42.5g, Torque 6.7, Tip Diameter 8.5mm
MID: Weight 42.5g, Torque 6.7, Tip Diameter 8.5mm
DT MOBIUS LIQUID FX LITE
LOW: Weight 51.0g, Torque 4.5, Tip Diameter 8.5mm
MID: Weight 51.0g, Torque 4.5, Tip Diameter 8.5mm
HIGH: Weight 51.0g, Torque 4.5, Tip Diameter 8.5mm
DT MOBIUS LIQUID FX
LOW: Weight 57.0g, Torque 3.9, Tip Diameter 8.5mm
MID: Weight 57.0g, Torque 3.9, Tip Diameter 8.5mm
HIGH: Weight 57.0g, Torque 3.9, Tip Diameter 8.5mm
DT MOBIUS LIQUID FX H
LOW: Weight 65.0g, Torque 3.8, Tip Diameter 8.5mm
MID: Weight 65.0g, Torque 3.8, Tip Diameter 8.5mm
HIGH: Weight 65.0g, Torque 3.8, Tip Diameter 8.5mm
Mobius
LIQUID
FW
Flow Point Technology
Swing behavior
Kick point
Head speed
Swing improvement
[[IF setVal=詳細情報1]] [[詳細情報1]] [[詳細情報内容1]]
[Important] Important Notes Before Purchase (Please read carefully) To ensure stable quality and service, please read the contents, agree, and proceed to your order.
■About Stock and Special Order
※About Stock
Our store shares inventory with multiple stores, so the displayed stock may not be real-time.
We will contact you separately if an item is out of stock.
※About Special Order Products
As a result of stock confirmation, items may be out of stock or discontinued.
In such cases, we may, at our discretion, cancel your order. We appreciate your understanding.
■About Head Fixing Screws
We deliver sleeves with a head fixing screw attached as a spare at the tip of the sleeve.
When installing, please remove it once before use.
Please note that this screw is provided as a service, and depending on the head model, the screw specifications may not match, and it may not be possible to fix it. We appreciate your understanding.
1. About Length Measurement Standard
We adopt the "60-degree rule" and unify the length standard to [the shaft end when the head is attached (the end of the shaft before the grip is attached)].
・We do not measure the shaft alone or from the tip of the sleeve to the end of the grip.
・Even if you specify the same length as the manufacturer's genuine value, the finished product may not be exactly the same because each manufacturer has different measurement standards.
・Therefore, we cannot accept production "with the exact same length as the manufacturer's genuine product." We appreciate your understanding.
2. About Shaft Assembly
・The shaft logo is assembled "face down" so that the logo is not visible when set up.
・If you have any other specific requests, please be sure to write them in the remarks column.
・For the selected mounting position, the standard is that the "shaft logo is on the back side (not visible when set up)".
・We do not perform balance adjustment or frequency measurement.
3. About Sleeve
・This is a compatible sleeve, but it can be used without any problems.
・A spare head fixing screw is attached to the tip of the sleeve. Please remove it before installation.
・This screw is part of a service, and depending on the head model, it may not be possible to install it due to differences in screw specifications.
4. About Grip
・We do not offer differential discounts within standard models.
・For standard grips with logos, the standard is "logo inserted face down (not visible when set up)".
【If you wish to change the grip】
・Select "Change" from the options and be sure to [purchase simultaneously] the grip alone on a separate sales page.
・If instructions are only in the remarks column, or if the grip is ordered separately (separate payment), the content may not be identifiable and we may not be able to respond.
【Backline and Logo Orientation Standard】
・With backline: logo face up
・Without backline: logo face down
※If you have any other specific requests, please write them in the remarks column.
※For grips with a backline, due to individual differences in heads, the logo may appear to overlap or open relative to the face.
【About Grip Underwrap】
The standard is a single wrap, and up to a triple wrap is possible.
For double wrap or more, please purchase the "Underwrap Surcharge (110 yen)" separately.
・If you wish for a double wrap: purchase 1 item
・If you wish for a triple wrap: purchase 2 items
※We use "spiral wrap" as the standard.
Underwrap Surcharge page URL:
https://item.rakuten.co.jp/banzaigolf/repair-00008/
5. About Delivery Time
・Due to complete made-to-order production, orders will be shipped within [4 to 5 business days] after order confirmation, excluding Saturdays, Sundays, and public holidays.
・Please check the estimated shipping date stated on the product page and place your order according to your schedule.
・Products will be manufactured in the order received. We cannot provide individual shipping date notifications or expedited responses.
・During busy seasons, sale periods, and before major holidays, it may take longer than usual.
6. About Cancellation, Return, and Change
・Since this product is completely made-to-order involving shaft cutting, cancellations and content changes (shaft type, length, mounting position, etc.) after order confirmation are not accepted at all.
※Excluding cases of our store's work errors or defects.
■About Delivery/Shipping
【About Upside Golf Main Store's Estimated Delivery Date Display】
・The displayed "earliest delivery date" is an estimate and does not guarantee the delivery time by our store.
・Completely made-to-order products and special order products may take time to ship.
・In-stock items may arrive earlier than the estimate, but delays may also occur depending on the situation. Please place your order with ample time.
【About Leave at Door Delivery】
・Due to many high-value products, and from the perspective of preventing damage and theft, we do not support "leave at door" delivery to outdoor locations.
・We also do not write "request leave at door" on the shipping label.
・We recommend in-person receipt, but if you wish to use a delivery locker, please write it in the [remarks column]. We will reflect it on the shipping label as much as possible.
※If the delivery person determines that the delivery locker cannot be used, it will be delivered in person.
