■■■ Important Notes Before Purchase ■■■
[About Stock]Our store shares inventory across multiple locations, so the displayed stock may not be in real-time.
In case of out of stock, we will contact you separately.
[About Pre-Order Items]As a result of stock confirmation, items may be out of stock or discontinued.
In such cases, we may, at our discretion, cancel your order.
We appreciate your understanding.
[About Fixing Screws (Important)]We deliver sleeves with a
"head fixing screw" attached as a spare at the tip.
When installing, please remove it once before use.Please note that this screw is provided as a service, so depending on the head model, the screw specifications may not match, preventing it from being fixed. Thank you for your understanding in advance.
■ Notes on Purchase (Please Read Carefully)
To provide stable quality and service, please read the contents and check the box before proceeding with your order.
1. About Length・We adopt the "60-degree method" and standardize the length reference to
"the shaft end when the head is attached (the end of the shaft before the grip is attached)".
・We do not measure the shaft alone or from the sleeve tip to the grip end.
・Even if you specify the same length as the manufacturer's genuine value, the finished product may not be exactly the same because each manufacturer has different measurement standards.
・Therefore, we
cannot accept production "exactly the same length as the manufacturer's genuine product." Thank you for your understanding in advance.
2. About Shaft・The shaft logo is assembled
"face down" so that the logo is not visible when set up.
・If you have any other specific requests, please be sure to write them in the remarks column.
・The standard for the selected installation position is "shaft logo on the back side (not visible when set up)."
・Balance adjustment and oscillation measurement are not performed.
3. About Sleeve・It is a compatible sleeve, but it can be used without problems.
・A spare screw for head fixing is attached to the tip of the sleeve. Please remove it before installation.
・This screw is a service item, so it may not be attachable due to different screw specifications depending on the head model.
4. About Grip・We do not offer difference discounts within standard models.
・For standard models with a logo, the standard is
"logo inserted face down (not visible when set up)".
・If you wish to change the grip, select "Change" in the options and
be sure to purchase the grip separately at the same time on a separate sales page.
※If you only specify in the remarks column or order separately, the content may not be identifiable and we may not be able to respond.
▼Logo Direction Standard (Presence/Absence of Backline)・With backline: Logo face up
・Without backline: Logo face down
※If you have any other requests, please specify them in the remarks column.
※If there is a backline, the logo may appear to overlap or open with respect to the face due to individual differences in the head.
▼About Grip Undercut (Paid Option)The standard is a single wrap (spiral wrap). Up to 3 wraps are possible.
If desired, please purchase the required number of items (1 for 2 wraps, 2 for 3 wraps) from the URL below at the same time.
Undercut Surcharge 110 yen
https://item.rakuten.co.jp/banzaigolf/repair-00008/
5. About Delivery Time・Because it is
made-to-order, we will ship it within
4-5 business days (excluding weekends and holidays) after your order is confirmed.
・We will produce in the order of orders. We cannot provide individual shipping date notifications (responses to urgent requests).
・During busy seasons, sale periods, and before/after long holidays, it may take longer than usual.
6. About Cancellation and Returns・Since this product is made-to-order involving shaft cutting,
cancellations and content changes (type, length, position, etc.) are absolutely not accepted after the order is confirmed. ※Excluding cases of our operational defects or initial defects.
■ About Delivery
[About Delivery Schedule Display on Upside Golf Main Store]・The displayed "earliest delivery date" is an estimate and does not guarantee delivery by our store.
・Made-to-order products and pre-order products may take time to ship.
・In-stock products may arrive earlier than the estimate, but delays may occur depending on the situation. Please place your order with plenty of time.
[About Contactless Delivery]・Since there are many high-value products, to avoid damage and theft risks, we
do not support "contactless delivery" outdoors.・We do not write "contactless delivery desired" on the waybill.
・We generally request face-to-face receipt. If you wish to use a delivery box, please write it in the remarks column, and we will reflect it on the slip as much as possible.
※If the delivery person determines that it cannot be used, it will be delivered in person.
Product Information The Graphite Design "TOUR AD IZ" shaft is an innovative product that is perfectly compatible with the latest head technology. This shaft is designed to maximize the transfer of rebound energy and aim for high initial velocity, thereby significantly improving golfer performance. By effectively placing high trajectory and high-strength carbon materials, the shaft's rigidity is optimized, providing flexibility to accommodate any swing.
"TOUR AD IZ" combines the shaft characteristics of PT and DI, which are highly used by tour professionals. This achieves both ease of timing on the downswing and tip strength at the same time. These characteristics minimize energy loss at impact and greatly contribute to increased distance with a powerful trajectory.
By adjusting the overall rigidity of the shaft, it provides stability and consistency during the swing, creating an environment where any golfer can swing with confidence. This allows players to hit more accurate shots and can expect an improvement in their score.
Furthermore, "TOUR AD IZ" is characterized not only by its high performance but also by its sophisticated design. Players can enjoy its benefits not only visually but also in actual play.
Graphite Design shafts used by professionals like Ryo Ishikawa and Tiger Woods have demonstrated their high performance in many tournaments. This "TOUR AD IZ" is no exception and is supported by many professional golfers.
*All mid-kick/46 inches/335 tip
4R2: Weight 46/Torque 5.6/Butt
4R1: Weight 47/Torque 5.6/Butt
4S: Weight 47/Torque 5.6/Butt
5R2: Weight 52/Torque 4.5/Butt
5R1: Weight 54/Torque 4.5/Butt
5S: Weight 56/Torque 4.4/Butt
5X: Weight 58/Torque 4.4/Butt
6SR: Weight 62/Torque 3.2/Butt
6S: Weight 63/Torque 3.2/Butt
6X: Weight 65/Torque 3.2/Butt
7S: Weight 72/Torque 3.1/Butt
7X: Weight 74/Torque 3.1/Butt
8S: Weight 82/Torque 2.9/Butt
8X: Weight 83/Torque 2.9/Butt
Graphite Design
TOUR AD IZ
Wood Shaft
Golf Shaft
High Initial Velocity
Rebound Energy
High Trajectory
Shaft Rigidity
Tour Professional
PT and DI Characteristics
Impact
Increased Distance
Swing Stability
Ryo Ishikawa Professional
Tiger Woods
Watanabe Seisakusho The "TOUR AD IZ" from Graphite Design is a shaft designed to maximize rebound energy transfer and pursue high initial velocity. It effectively places high-trajectory and high-strength carbon materials to optimize shaft rigidity. By combining the characteristics of PT and DI, which are highly used by tour professionals, it achieves both ease of timing and tip strength. It minimizes energy loss at impact, contributing to increased distance with a powerful trajectory.
【Important】Notes Before Purchase (Please Read Carefully) To provide stable quality and service, please read the content and proceed with your order after agreeing.
■About Stock and Pre-Order Items ※About Stock
Our store shares inventory across multiple stores, so the displayed stock may not be in real-time.
In case of out of stock, we will contact you separately.
※About Pre-Order Items
As a result of stock confirmation, items may be out of stock or discontinued.
In such cases, we may, at our discretion, cancel your order. Thank you for your understanding in advance.
■About Head Fixing Screws We deliver sleeves with a spare head fixing screw attached to the tip.
When installing, please remove it once before use.
Please note that this screw is provided as a service, so depending on the head model, the screw specifications may not match, preventing it from being fixed. Thank you for your understanding in advance.
1. Standard for Length Measurement We adopt the "60-degree method" and standardize the length reference to [the shaft end when the head is attached (the end of the shaft before the grip is attached)].
・We do not measure the shaft alone or from the sleeve tip to the grip end.
・Even if you specify the same length as the manufacturer's genuine value, the finished product may not be exactly the same because each manufacturer has different measurement standards.
・Therefore, we cannot accept production "exactly the same length as the manufacturer's genuine product." Thank you for your understanding in advance.
2. About Shaft Assembly ・The shaft logo is assembled "face down" so that the logo is not visible when set up.
・If you have any other specific requests, please be sure to write them in the remarks column.
・For the selected installation position, we assemble with the "shaft logo on the back side (not visible when set up)" as the standard.
・Balance adjustment and oscillation measurement are not performed.
3. About Sleeve ・It is a compatible sleeve, but it can be used without problems.
・A spare screw for head fixing is attached to the tip of the sleeve. Please remove it before installation.
・This screw is a service item, and it may not be attachable due to different screw specifications depending on the head model.
4. About Grip ・We do not offer difference discounts within standard models.
・For standard grips with a logo, the standard is "logo inserted face down (not visible when set up).
【If you wish to change the grip】
・Select "Change" from the options and be sure to [purchase] the grip separately at the same time on a separate sales page.
・If you only specify in the remarks column or order grips separately (separate payment), the content may not be identifiable and we may not be able to respond.
【Standard for Backline and Logo Direction】
・With backline: Logo face up
・Without backline: Logo face down
※If you have any other requests, please specify them in the remarks column.
※If there is a backline, the logo may appear to overlap or open with respect to the face due to individual differences in the head.
【About Grip Undercut】
The standard is a single wrap, and up to 3 wraps are possible.
If you want 2 or more wraps, please purchase the "Undercut Surcharge (110 yen)" separately.
・If you want 2 wraps: Purchase 1 item
・If you want 3 wraps: Purchase 2 items
※We use "spiral wrap" as the standard.
Undercut Surcharge Page URL:
https://item.rakuten.co.jp/banzaigolf/repair-00008/
5. About Delivery Time ・Since it is made-to-order, we will ship it within [4-5 business days] (excluding weekends and holidays) after your order is confirmed.
・Please check the estimated shipping date described on the product page and place your order according to your schedule.
・We will produce in the order of orders. We cannot provide individual shipping date notifications or expedite delivery.
・During busy seasons, sale periods, and before/after long holidays, it may take longer than usual.
6. About Cancellation, Returns, and Changes ・Since this product is made-to-order involving shaft cutting, cancellations and content changes (shaft type, length, installation position, etc.) are absolutely not accepted after the order is confirmed.
※Excluding cases of our operational defects or initial defects.
■About Delivery 【About Delivery Schedule Display on Upside Golf Main Store】
・The displayed "earliest delivery date" is an estimate and does not guarantee delivery by our store.
・Made-to-order products and pre-order products may take time to ship.
・In-stock products may arrive earlier than the estimate, but delays may occur depending on the situation. Please place your order with plenty of time.
【About Contactless Delivery】
・Since there are many high-value products, to prevent damage and theft, we do not support "contactless delivery" outdoors.
・We do not write "contactless delivery desired" on the waybill.
・We recommend face-to-face receipt, but if you wish to use a delivery box, please write it in the [remarks column]. We will reflect it on the shipping slip as much as possible.
※If the delivery person determines that the delivery box cannot be used, it will be delivered in person.
