■■■ Important Notes Before Purchase ■■■
【Regarding Stock】As our store shares inventory across multiple locations, the displayed stock may not be real-time.
In case of a shortage, we will contact you separately.
【Regarding Special Order Items】As a result of checking inventory, items may be out of stock or discontinued.
In such cases, we may, at our discretion, cancel your order.
We appreciate your understanding.
【Regarding Fixing Screws (Important)】We deliver sleeves with a
"head fixing screw" attached as a spare at the tip.
When installing, please remove it once before use.Please note that this screw is provided as a service, so it may not fit and secure the head depending on the head model. We appreciate your understanding.
■ Important Notes Before Purchase (Please Read Carefully)
To provide stable quality and service, please read the content and check the box to proceed with your order.
1. Regarding Length・Our store uses the "60-degree method," and the length standard is unified to
"shaft end when the head is attached (the end of the shaft before the grip is attached)."・We do not measure the shaft alone or from the sleeve tip to the grip end.
・Even if you specify the same length as the manufacturer's genuine specifications, the finished product may not be exactly the same due to different measurement standards for each manufacturer.
・Therefore, our store
cannot accept production with "exactly the same length as the manufacturer's genuine product." We appreciate your understanding.
2. Regarding Shaft・The shaft logo is assembled
"face down" so that the logo is not visible when set up.
・If you have separate specifications, please be sure to write them in the remarks column.
・For the selected installation position, the standard is "shaft logo on the back (not visible when set up)."
・Balance adjustment and vibration frequency measurement are not performed.
3. Regarding Sleeve・It is a compatible sleeve, but it can be used without problems.
・A spare head fixing screw is attached to the tip of the sleeve. Please remove it before installation.
・Since this screw is a service item, it may not be able to be installed due to different screw specifications depending on the head model.
4. Regarding Grip・There is no differential discount within standard models.
・For standard models with a logo, the standard is
"logo inserted facing down (not visible when set up)."・If you wish to change the grip, select "Change" from the options and
be sure to purchase the grip separately on the sales page at the same time. *If you only provide instructions in the remarks column or place a separate order, we may not be able to identify the content and may not be able to respond.
▼Logo Orientation Standard (Presence/Absence of Backline)・With backline: Logo facing up
・Without backline: Logo facing down
*If you have separate requests, please write them in the remarks column.
*If there is a backline, the logo may appear to be covered by or open to the face due to individual differences in the head.
▼Regarding Grip Undercut (Paid Option)The standard is a single wrap (spiral wrap). Up to a triple wrap is possible.
If you wish, please purchase the required number of items (1 for double wrap, 2 for triple wrap) from the URL below at the same time.
Undercut Surcharge 110 yen
https://item.rakuten.co.jp/banzaigolf/repair-00008/
5. Regarding Delivery Time・Due to
complete made-to-order production, orders will be shipped within
4-5 business days after confirmation, excluding weekends and holidays.
・Production will be carried out in the order of orders received. We cannot provide individual shipping date notifications (responses to urgent requests).
・During busy periods, sale periods, and before and after major holidays, it may take longer than usual.
6. Regarding Cancellation/Returns・Since this product is completely made-to-order production involving shaft cutting,
cancellations or content changes (type, length, position, etc.) after order confirmation are not accepted at all. *This excludes errors in our work or initial defects.
■ Shipping and Delivery
【Regarding Shipping Schedule Display on Upside Golf Main Store】・The displayed "shortest delivery date" is an estimate and does not guarantee delivery by our store.
・Made-to-order and special order items may take time to ship.
・In-stock items may arrive earlier than the estimate, but delays may also occur depending on the situation. Please place your order with ample time.
【Regarding Leave at Door Delivery】・Due to the high value of many products and to avoid the risk of damage or theft,
we do not support "leave at door" delivery outdoors.・We also do not write "request for leave at door" on the waybill.
・We generally request in-person receipt. If you wish to use a delivery box, please write it in the remarks column, and we will reflect it on the slip as much as possible.
*If the delivery box cannot be used at the discretion of the delivery driver, it will be delivered in person.
Product Information Graphite Design's "TOUR AD IZ" shaft is an innovative product that has perfect compatibility with the latest head technology. This shaft is designed to maximize rebound energy transfer and aim for high initial velocity, thereby significantly improving golfer performance. By effectively arranging high trajectory and high-strength carbon materials, the shaft's rigidity is optimized, providing flexibility to adapt to any swing.
"TOUR AD IZ" combines the shaft characteristics of PT and DI, which boast a high usage rate among tour pros. This achieves both ease of timing the changeover and tip strength simultaneously. These characteristics minimize energy loss at impact and greatly contribute to increased distance with a powerful trajectory.
By adjusting the overall rigidity of the shaft, it provides stability and consistency during the swing, creating an environment where any golfer can swing with confidence. This allows players to hit more accurate shots, leading to improved scores.
Furthermore, "TOUR AD IZ" is characterized not only by its high performance but also by its sophisticated design. Players can enjoy not only visual satisfaction but also the benefits in actual play.
The Graphite Design shafts used by Ryo Ishikawa and Tiger Woods have demonstrated their high performance in many tournaments. This "TOUR AD IZ" is no exception and is supported by many professional golfers.
*All mid-kick/46 inches/335 tip
4R2: Weight 46/Torque 5.6/Butt
4R1: Weight 47/Torque 5.6/Butt
4S: Weight 47/Torque 5.6/Butt
5R2: Weight 52/Torque 4.5/Butt
5R1: Weight 54/Torque 4.5/Butt
5S: Weight 56/Torque 4.4/Butt
5X: Weight 58/Torque 4.4/Butt
6SR: Weight 62/Torque 3.2/Butt
6S: Weight 63/Torque 3.2/Butt
6X: Weight 65/Torque 3.2/Butt
7S: Weight 72/Torque 3.1/Butt
7X: Weight 74/Torque 3.1/Butt
8S: Weight 82/Torque 2.9/Butt
8X: Weight 83/Torque 2.9/Butt
Graphite Design
TOUR AD IZ
Wood Shaft
Golf Shaft
High Initial Velocity
Rebound Energy
High Trajectory
Shaft Rigidity
Tour Pro
PT and DI Characteristics
Impact
Increased Distance
Swing Stability
Ryo Ishikawa Pro
Tiger Woods
Watanabe Seisakusho Graphite Design's "TOUR AD IZ" shaft aims to maximize rebound energy transfer and pursue high initial velocity. It effectively places high trajectory and high-strength carbon materials to optimize shaft rigidity. It combines the characteristics of PT and DI, which are highly used by tour pros, to achieve ease of timing and tip strength. It minimizes energy loss at impact and contributes to increased distance with a powerful trajectory.
【Important】Notes Before Purchase (Please Read Carefully) To provide stable quality and service, please read the content and agree before proceeding with your order.
■About Stock and Special Orders *About Stock
Our store shares inventory across multiple locations, so the displayed stock may not be real-time.
In case of a shortage, we will contact you separately.
*About Special Order Items
As a result of checking inventory, items may be out of stock or discontinued.
In such cases, we may, at our discretion, cancel your order. We appreciate your understanding.
■About Head Fixing Screws We deliver sleeves with a head fixing screw attached as a spare at the tip.
When installing, please remove it once before use.
Please note that this screw is provided as a service, so it may not fit and secure the head depending on the head model due to different screw specifications. We appreciate your understanding.
1. Standard for Measuring Length Our store uses the "60-degree method," and the length standard is unified to 【shaft end when the head is attached (the end of the shaft before the grip is attached)】.
・We do not measure the shaft alone or from the sleeve tip to the grip end.
・Even if you specify the same length as the manufacturer's genuine specifications, the finished product may not be exactly the same due to different measurement standards for each manufacturer.
・Therefore, our store cannot accept production with "exactly the same length as the manufacturer's genuine product." We appreciate your understanding.
2. About Shaft Assembly ・The shaft logo is assembled "face down" so that the logo is not visible when set up.
・If you have separate specifications, please be sure to write them in the remarks column.
・For the selected installation position, the standard for assembly is "shaft logo on the back (not visible when set up)."
・Balance adjustment and vibration frequency measurement are not performed.
3. About Sleeves ・It is a compatible sleeve, but it can be used without problems.
・A spare head fixing screw is attached to the tip of the sleeve. Please remove it before installation.
・This screw is part of a service, and it may not be able to be installed due to different screw specifications depending on the head model.
4. About Grips ・There is no differential discount within standard models.
・For standard grips with a logo, the standard is "logo inserted facing down (not visible when set up)."
【If you wish to change the grip】
・Select "Change" from the options and be sure to 【purchase the grip separately】 on the sales page at the same time.
・If you only provide instructions in the remarks column or place a separate order (separate payment) for the grip, we may not be able to identify the content and may not be able to respond.
【Backline and Logo Orientation Standard】
・With backline: Logo facing up
・Without backline: Logo facing down
*If you have separate requests, please write them in the remarks column.
*If there is a backline, the logo may appear to be covered by or open to the face due to individual differences in the head.
【About Grip Undercut】
The standard is a single wrap, and up to a triple wrap is possible.
If you wish for a double wrap or more, please purchase "Undercut Surcharge (110 yen)" separately.
・If you wish for a double wrap: Purchase 1 item
・If you wish for a triple wrap: Purchase 2 items
*Our store uses "spiral wrap" as the standard.
Undercut Surcharge Page URL:
https://item.rakuten.co.jp/banzaigolf/repair-00008/
5. About Delivery Time ・Due to complete made-to-order production, orders will be shipped within 【4-5 business days】 after confirmation, excluding weekends and holidays.
・Please check the estimated shipping date stated on the product page and place your order according to your usage schedule.
・Production will be carried out in the order of orders received. We cannot provide individual shipping date notifications or expedite requests.
・During busy periods, sale periods, and before and after major holidays, it may take longer than usual.
6. About Cancellation, Returns, and Changes ・Since this product is completely made-to-order production involving shaft cutting, cancellations or content changes (shaft type, length, installation position, etc.) after order confirmation are not accepted at all.
*This excludes errors or defects in our work.
■Shipping and Delivery 【About Shipping Schedule Display on Upside Golf Main Store】
・The displayed "shortest delivery date" is an estimate and does not guarantee delivery by our store.
・Completely made-to-order and special order items may take time to ship.
・In-stock items may arrive earlier than the estimate, but delays may also occur depending on the situation. Please place your order with ample time.
【About Leave at Door Delivery】
・Due to the high value of many products and from the perspective of preventing damage and theft, we do not support "leave at door" delivery outdoors.
・We also do not write "request for leave at door" on the waybill.
・We recommend in-person receipt, but if you wish to use a delivery box, please write it in the 【remarks column】. We will reflect it on the shipping slip as much as possible.
*If the delivery box cannot be used at the discretion of the delivery driver, it will be delivered in person.
