■■■ Precautions Before Purchase ■■■
[About Stock]As our store shares inventory across multiple locations, the displayed stock may not be real-time.
In case of a shortage, we will contact you separately.
[About Back-Ordered Products]As a result of stock confirmation, products may be out of stock or discontinued.
In such cases, we may, at our discretion, cancel your order.
We appreciate your understanding.
[Regarding Fixing Screws (Important)]We deliver sleeves with a
"head fixing screw" attached as a spare at the tip of the sleeve.
When installing, please remove it once before use.Please note that this screw is provided as a complimentary service, so depending on the head model, the screw specifications may not match, and it may not be possible to fix the head. We appreciate your understanding.
■ Precautions Regarding Purchase (Please Read Carefully)
To ensure stable quality and service, please read the contents and check the box to proceed with your order.
1. Regarding Length・We adopt the "60-degree method," and the length standard is unified to
"the shaft end when the head is attached (the end of the shaft before the grip is attached)."・We do not measure the shaft alone or from the sleeve tip to the grip end.
・Even if you specify the same length as the manufacturer's genuine specifications, the actual finished length may not be exactly the same due to different measurement standards among manufacturers.
・Therefore, we regret to inform you that we
cannot accept requests for production with "the exact same length as the manufacturer's genuine specifications." We appreciate your understanding.
2. Regarding Shaft・The shaft logo is assembled
"face down" so that the logo is not visible when set up.
・If you have any specific requests, please make sure to write them in the remarks column.
・The standard for the selected installation position is "shaft logo on the back side (not visible when set up)."
・We do not perform balance adjustment or frequency measurement.
3. Regarding Sleeve・It is a compatible sleeve, but it can be used without any problems.
・A spare head fixing screw is attached to the tip of the sleeve. Please remove it before installation.
・This screw is a complimentary item, so depending on the head model, the screw specifications may differ, and it may not be possible to attach it.
4. Regarding Grip・We do not offer differential discounts within standard models.
・For standard models with a logo, the standard is
"logo inserted upside down (not visible when set up)."・If you wish to change the grip, select "Change" from the options and
be sure to purchase the grip separately on the sales page at the same time. *If instructions are only in the remarks column or a separate order is placed, we may not be able to identify the content and may not be able to accommodate it.
▼Logo Direction Standard (Presence/Absence of Backline)・With backline: Logo facing up
・Without backline: Logo facing down
*If you have any other requests, please specify them in the remarks column.
*If there is a backline, the logo may appear to be covered or open relative to the face due to individual differences in the head.
▼Regarding Grip Undercut (Paid Option)The standard is a single wrap (spiral wrap). Up to a triple wrap is possible.
If you wish, please purchase the required number of the product at the URL below (1 item for double wrap, 2 items for triple wrap) at the same time.
Undercut surcharge 110 yen
https://item.rakuten.co.jp/banzaigolf/repair-00008/
5. Regarding Delivery Time・Since it is
made to order, we will ship it within
4 to 5 business days after your order is confirmed, excluding weekends and holidays.
・We will produce in the order received. We cannot provide individual shipping date notifications (responses to urgent requests).
・During busy seasons, sale periods, and before/after long holidays, it may take longer than usual.
6. Regarding Cancellation and Returns・Since this product is made to order and involves shaft cutting,
we cannot accept any cancellations or changes to the content (type, length, position, etc.) after the order is confirmed. *Excluding cases of errors in our work or initial defects.
■ About Delivery and Shipping
[About Delivery Schedule Display on Upside Golf Main Store]・The displayed "earliest delivery date" is an estimate, and we do not guarantee the delivery time.
・Made-to-order products and back-ordered products may take time to ship.
・In-stock products may arrive earlier than the estimate, but delays may also occur depending on the situation. Please place your order with ample time.
[About Leave-at-door Delivery]・Due to the high value of many products and to avoid risks of damage or theft, we
do not support "leave-at-door" delivery to outdoor locations.・We also do not write "leave-at-door delivery requested" on the waybill.
・We basically request in-person receipt. If you wish to use a delivery box, please write it in the remarks column, and we will reflect it on the slip as much as possible.
*If the delivery person determines that it cannot be used, it will be handed over in person.
Product Information The "TOUR AD IZ" shaft from Graphite Design is an innovative product that perfectly matches the latest head technology. This shaft is designed to maximize the transfer of repulsive energy and aim for high initial velocity, significantly improving golfer performance. By effectively arranging high trajectory and high-strength carbon materials, it optimizes shaft rigidity and provides the flexibility to adapt to any swing.
"TOUR AD IZ" combines the shaft characteristics of PT and DI, which boast a high usage rate among tour pros. This achieves both ease of timing the changeover and tip strength simultaneously. These characteristics minimize energy loss at impact, significantly contributing to increased distance with a powerful trajectory.
By adjusting the overall shaft rigidity, it provides stability and consistency during the swing, creating an environment where any golfer can swing with confidence. This allows players to hit more accurate shots, leading to an expected improvement in scores.
Furthermore, "TOUR AD IZ" is characterized not only by its high performance but also by its sophisticated design. Players can not only be visually satisfied but also enjoy its benefits in actual play.
Graphite Design shafts, used by pros such as Ryo Ishikawa and Tiger Woods, have demonstrated their high performance in numerous tournaments. This "TOUR AD IZ" is no exception and is supported by many professional golfers.
*All are mid-kick/46 inches/335 tip
4R2: Weight 46 / Torque 5.6 / Butt
4R1: Weight 47 / Torque 5.6 / Butt
4S: Weight 47 / Torque 5.6 / Butt
5R2: Weight 52 / Torque 4.5 / Butt
5R1: Weight 54 / Torque 4.5 / Butt
5S: Weight 56 / Torque 4.4 / Butt
5X: Weight 58 / Torque 4.4 / Butt
6SR: Weight 62 / Torque 3.2 / Butt
6S: Weight 63 / Torque 3.2 / Butt
6X: Weight 65 / Torque 3.2 / Butt
7S: Weight 72 / Torque 3.1 / Butt
7X: Weight 74 / Torque 3.1 / Butt
8S: Weight 82 / Torque 2.9 / Butt
8X: Weight 83 / Torque 2.9 / Butt
Graphite Design
TOUR AD IZ
Wood shaft
Golf shaft
High initial velocity
Repulsive energy
High trajectory
Shaft rigidity
Tour pro
PT and DI characteristics
Impact
Increased distance
Swing stability
Ryo Ishikawa Pro
Tiger Woods
Watanabe Seisakusho's "TOUR AD IZ" from Graphite Design is a shaft designed to maximize the transfer of repulsive energy and achieve high initial velocity. It optimizes shaft rigidity by effectively arranging high trajectory and high-strength carbon materials. By combining the characteristics of PT and DI, which are highly used by tour pros, it achieves both ease of timing and tip strength. It minimizes energy loss at impact, contributing to increased distance with a powerful trajectory.
【Important】Precautions before purchasing (please read carefully) To ensure stable quality and service, please read the content and proceed with your order after agreeing.
■Stock and back-ordered items *About stock
Our store shares inventory across multiple locations, so the displayed stock may not be real-time.
In case of a shortage, we will contact you separately.
*About back-ordered items
As a result of stock confirmation, items may be out of stock or discontinued.
In such cases, we may, at our discretion, cancel your order. We appreciate your understanding.
■About head fixing screws We deliver sleeves with a head fixing screw attached as a spare at the tip of the sleeve.
When installing, please remove it once before use.
Please note that this screw is provided as a complimentary service, so depending on the head model, the screw specifications may not match, and it may not be possible to fix the head. We appreciate your understanding.
1. About length measurement standards We adopt the "60-degree method" and unify the length standard to 【the shaft end when the head is attached (the end of the shaft before the grip is attached)】.
・We do not measure the shaft alone or from the sleeve tip to the grip end.
・Even if you specify the same length as the manufacturer's genuine specifications, the actual finished length may not be exactly the same due to different measurement standards among manufacturers.
・Therefore, we regret to inform you that we cannot accept requests for production with "the exact same length as the manufacturer's genuine specifications." We appreciate your understanding.
2. About shaft assembly ・The shaft logo is assembled "face down" so that the logo is not visible when set up.
・If you have any specific requests, please make sure to write them in the remarks column.
・For the selected installation position, we assemble based on the "shaft logo being on the back side (not visible when set up)."
・We do not perform balance adjustment or frequency measurement.
3. About sleeve ・It is a compatible sleeve, but it can be used without any problems.
・A spare head fixing screw is attached to the tip of the sleeve. Please remove it before installation.
・This screw is a complimentary item, and depending on the head model, it may not be possible to attach it due to differences in screw specifications.
4. About grip ・We do not offer differential discounts within standard models.
・For standard grips with a logo, the standard is "logo inserted upside down (not visible when set up)."
【If you wish to change the grip】
・Please select "Change" from the options and be sure to 【purchase the grip separately】 on the sales page at the same time.
・If instructions are only in the remarks column or the grip is ordered separately (separate payment), we may not be able to identify the content and may not be able to accommodate it.
【Backline and logo orientation standards】
・With backline: Logo facing up
・Without backline: Logo facing down
※If you have any other requests, please specify them in the remarks column.
※If there is a backline, the logo may appear to be covered or open relative to the face due to individual differences in the head.
【About grip underwrap】
The standard is a single wrap, and up to a triple wrap is possible.
For double wrap or more, please purchase "Undercut surcharge (110 yen)" separately.
・If you wish for a double wrap: purchase 1 item
・If you wish for a triple wrap: purchase 2 items
※We use "spiral wrap" as the standard.
Undercut surcharge page URL:
https://item.rakuten.co.jp/banzaigolf/repair-00008/
5. About delivery time ・Since it is made to order, we will ship it within 【4 to 5 business days】 after your order is confirmed, excluding weekends and holidays.
・Please confirm the estimated shipping date stated on the product page and place your order according to your schedule.
・We will produce in the order received. We cannot provide individual shipping date notifications or expedite the process.
・During busy seasons, sale periods, and before/after long holidays, it may take longer than usual.
6. About cancellation, returns, and changes ・Since this product is made to order and involves shaft cutting, we cannot accept any cancellations or changes to the content (shaft type, length, installation position, etc.) after the order is confirmed.
※Excluding cases of errors in our work or defects.
■About delivery and shipping 【About estimated delivery date display on Upside Golf Main Store】
・The displayed "earliest delivery date" is an estimate, and we do not guarantee the delivery time.
・Made-to-order products and back-ordered products may take time to ship.
・In-stock products may arrive earlier than the estimate, but delays may also occur depending on the situation. Please place your order with ample time.
【About leave-at-door delivery】
・Due to the high value of many products, and from the perspective of preventing damage and theft, we do not support "leave-at-door" delivery to outdoor locations.
・We also do not write "leave-at-door delivery requested" on the waybill.
・We recommend in-person receipt, but if you wish for a delivery box, please write it in the 【remarks column】. We will reflect it on the shipping slip as much as possible.
※If the delivery person determines that the delivery box cannot be used, it will be handed over in person.
