■■■ Important Notes Before Purchase ■■■
[About Stock]As our store shares inventory with multiple other stores, the displayed stock may not be real-time.
In case of out-of-stock, we will contact you separately.
[About Backordered Products]As a result of checking stock, products may be out of stock or discontinued.
In such cases, we may, at our discretion, cancel your order.
Thank you for your understanding.
[Important: About Fixing Screws]We ship sleeves with a
"head fixing screw" attached as a spare at the tip.
Please remove it before attaching the head.Please note that this screw is provided as a service, and it may not fit and fix the head depending on the head model. Thank you for your understanding.
■ Important Notes on Purchasing (Please read carefully)
To ensure stable quality and service, please read the content and check the box to proceed with your order.
1. About Length・We use the "60-degree method" and the length standard is unified to
"shaft end when head is attached (shaft end before grip is attached)".
・We do not measure the shaft alone or from the sleeve tip to the grip end.
・Even if you specify the same length as the manufacturer's genuine value, the actual finished length may not be exactly the same due to different measurement standards for each manufacturer.
・Therefore, we
cannot accept orders for products with "exactly the same length as the manufacturer's genuine product." Thank you for your understanding.
2. About Shaft・The shaft logo is assembled
"face down" so that the logo is not visible when set up.
・If you have any other specific requests, please be sure to write them in the remarks column.
・For the selected mounting position, the standard is "shaft logo on the back (not visible when set up)".
・Balance adjustment and oscillation measurement are not performed.
3. About Sleeve・This is a compatible sleeve and can be used without any problems.
・A spare head fixing screw is attached to the tip of the sleeve. Please remove it before attaching.
・Since this screw is a service item, it may not be attachable due to different screw specifications depending on the head model.
4. About Grip・We do not offer difference discounts within standard models.
・For standard models with a logo, the standard is
"logo inserted face down (not visible when set up)".
・If you wish to change the grip, select "Change" and
be sure to purchase the grip separately on the sales page at the same time.
※If the instruction is only in the remarks column or if it is a separate order, we may not be able to identify the content and may not be able to respond.
▼Logo Direction Standard (Presence/Absence of Backline)・With backline: Logo face up
・Without backline: Logo face down
※If you have any other specific requests, please write them in the remarks column.
※In the case of a backline, depending on the individual head, the logo may appear to be covered by or open to the face.
▼About Grip Undercutting (Paid Option)The standard is 1 layer (spiral winding). Up to 3 layers are possible.
If you wish, please purchase the required number of items (1 for 2 layers, 2 for 3 layers) from the URL below at the same time.
Undercutting Surcharge 110 yen
https://item.rakuten.co.jp/banzaigolf/repair-00008/
5. About Delivery Time・Since this is
complete made-to-order production, we will ship within
4 to 5 business days (excluding Saturdays, Sundays, and holidays) after your order is confirmed.
・Products will be manufactured in the order received. We cannot respond to individual shipping date notifications (responses to inquiries for expedited shipping).
・During busy periods, sale periods, and before and after long holidays, it may take longer than usual.
6. About Cancellation/Return・Since this product is a complete made-to-order production involving shaft cutting,
we cannot accept any cancellations or changes to the content (type, length, position, etc.) after your order is confirmed. ※Excluding cases of our operational errors or initial defects.
■ About Delivery
[About Delivery Schedule Display on Upside Golf Main Store]・The displayed "earliest delivery date" is an estimate and does not guarantee the delivery date from our store.
・Made-to-order products and backordered products may take time to ship.
・In-stock products may arrive earlier than the estimate, but delays may also occur depending on the situation. Please place your order with ample time.
[About Leave at Door]・Due to the high value of many products and to avoid risks of damage and theft, we
do not support "leave at door" delivery to outdoor locations.・We also do not write "request leave at door" on the waybill.
・We generally request in-person receipt. If you wish to use a delivery locker, please write it in the remarks column, and we will reflect it on the slip as much as possible.
※If the delivery locker cannot be used due to the delivery driver's discretion, it will be delivered in person.
Product Information Graphite Design's "TOUR AD IZ" shaft is an innovative product that perfectly matches the latest head technology. This shaft is designed to maximize rebound energy transfer and achieve high initial velocity, thereby significantly improving golfer performance. By effectively placing high trajectory and high-strength carbon materials, the shaft's rigidity is optimized, providing flexibility to accommodate any swing.
"TOUR AD IZ" combines the shaft characteristics of PT and DI, which boast high usage rates among tour professionals. This achieves both ease of timing for the changeover and strong tip performance. These characteristics minimize energy loss at impact, contributing significantly to increased distance with a powerful trajectory.
Adjusting the overall rigidity of the shaft provides stability and consistency during the swing, creating an environment where any golfer can swing with confidence. This allows players to hit more accurate shots, leading to improved scores.
Furthermore, "TOUR AD IZ" is characterized not only by its high performance but also by its sophisticated design. Players can enjoy not only visual satisfaction but also its benefits in actual play.
Graphite Design shafts, used by professional golfers like Ryo Ishikawa and Tiger Woods, have proven their high performance in numerous tournaments. This "TOUR AD IZ" is no exception and is supported by many professional golfers.
*All mid-kick/46 inches/335tip
4R2: Weight 46/Torque 5.6/Butt
4R1: Weight 47/Torque 5.6/Butt
4S: Weight 47/Torque 5.6/Butt
5R2: Weight 52/Torque 4.5/Butt
5R1: Weight 54/Torque 4.5/Butt
5S: Weight 56/Torque 4.4/Butt
5X: Weight 58/Torque 4.4/Butt
6SR: Weight 62/Torque 3.2/Butt
6S: Weight 63/Torque 3.2/Butt
6X: Weight 65/Torque 3.2/Butt
7S: Weight 72/Torque 3.1/Butt
7X: Weight 74/Torque 3.1/Butt
8S: Weight 82/Torque 2.9/Butt
8X: Weight 83/Torque 2.9/Butt
Graphite Design
TOUR AD IZ
Wood Shaft
Golf Shaft
High Initial Velocity
Rebound Energy
High Trajectory
Shaft Rigidity
Tour Professional
PT and DI Characteristics
Impact
Increased Distance
Swing Stability
Ryo Ishikawa Pro
Tiger Woods
Watanabe Seisakusho's "TOUR AD IZ" from Graphite Design is a shaft designed to maximize rebound energy transfer and pursue high initial velocity. It effectively places high trajectory and high-strength carbon materials to optimize shaft rigidity. It combines the characteristics of PT and DI, which are highly used by tour professionals, to achieve both ease of timing and strong tip performance. It minimizes energy loss at impact, contributing to increased distance with a powerful trajectory.
【Important】Notes Before Purchase (Please read carefully) To provide stable quality and service, please read the content and proceed with your order after agreeing.
■About Stock and Backorders *About Stock
As our store shares inventory with multiple other stores, the displayed stock may not be real-time.
In case of out-of-stock, we will contact you separately.
*About Backordered Products
As a result of checking stock, products may be out of stock or discontinued.
In such cases, we may, at our discretion, cancel your order. Thank you for your understanding.
■About Head Fixing Screws We ship sleeves with a head fixing screw attached as a spare at the tip.
Please remove it before attaching the head.
Please note that this screw is provided as a service, and it may not be attachable due to different screw specifications depending on the head model. Thank you for your understanding.
1. About Length Measurement Standard We use the "60-degree method" and the length standard is unified to 【shaft end when head is attached (shaft end before grip is attached)】.
・We do not measure the shaft alone or from the sleeve tip to the grip end.
・Even if you specify the same length as the manufacturer's genuine value, the actual finished length may not be exactly the same due to different measurement standards for each manufacturer.
・Therefore, we cannot accept orders for products with "exactly the same length as the manufacturer's genuine product." Thank you for your understanding.
2. About Shaft Assembly ・The shaft logo is assembled "face down" so that the logo is not visible when set up.
・If you have any other specific requests, please be sure to write them in the remarks column.
・For the selected mounting position, the standard is "shaft logo on the back (not visible when set up)".
・Balance adjustment and oscillation measurement are not performed.
3. About Sleeve ・This is a compatible sleeve and can be used without any problems.
・A spare head fixing screw is attached to the tip of the sleeve. Please remove it before attaching.
・This screw is part of our service, and it may not be attachable due to different screw specifications depending on the head model.
4. About Grip ・We do not offer difference discounts within standard models.
・For standard grips with a logo, the standard is "logo inserted face down (not visible when set up)".
【If you wish to change the grip】
・Select "Change" from the options and be sure to 【purchase the grip separately】 on the sales page at the same time.
・If the instruction is only in the remarks column or if the grip is ordered separately (separate payment), we may not be able to identify the content and may not be able to respond.
【Standard for Backline and Logo Direction】
・With backline: Logo face up
・Without backline: Logo face down
※If you have any other specific requests, please write them in the remarks column.
※In the case of a backline, depending on the individual head, the logo may appear to be covered by or open to the face.
【About Grip Undercutting】
The standard is 1 layer, and up to 3 layers are possible.
If you wish for 2 or more layers, please purchase the separate "Undercutting Surcharge (110 yen)".
・If you wish for 2 layers: Purchase 1 item
・If you wish for 3 layers: Purchase 2 items
※Our standard is "spiral winding".
Undercutting Surcharge Page URL:
https://item.rakuten.co.jp/banzaigolf/repair-00008/
5. About Delivery Time ・Since this is complete made-to-order production, we will ship within 【4 to 5 business days】 (excluding Saturdays, Sundays, and holidays) after your order is confirmed.
・Please check the estimated shipping date on the product page and place your order according to your schedule.
・Products will be manufactured in the order received. We cannot provide individual shipping date notifications or expedite shipping.
・During busy periods, sale periods, and before and after long holidays, it may take longer than usual.
6. About Cancellation, Return, and Change ・Since this product is a complete made-to-order production involving shaft cutting, we cannot accept any cancellations or changes to the content (shaft type, length, mounting position, etc.) after your order is confirmed.
※Excluding cases of our operational errors or defects.
■About Delivery ・About Delivery Schedule Display on Upside Golf Main Store
・The displayed "earliest delivery date" is an estimate and does not guarantee the delivery date from our store.
・Complete made-to-order products and backordered products may take time to ship.
・In-stock products may arrive earlier than the estimate, but delays may also occur depending on the situation. Please place your order with ample time.
【About Leave at Door】
・Due to the high value of many products and to prevent damage and theft, we do not support "leave at door" delivery to outdoor locations.
・We also do not write "request leave at door" on the waybill.
・We recommend in-person receipt, but if you wish to use a delivery locker, please write it in the 【remarks column】. We will reflect it on the shipping slip as much as possible.
※If the delivery locker cannot be used due to the delivery driver's discretion, it will be delivered in person.
